Flow Meter

Flow Meter
Flow Meter
Price And Quantity
  • Unit/Units
  • 1
  • Unit/Units
  • 1000.00 - 5000.00 INR
    Product Description

    The rotameter is an industrial flowmeter used to measure the flowrate of liquids
    and gases. The rotameter consists of a tube and float. The float response to
    flowrate changes is linear, and a 10-to-1 flow range or turndown is standard. In the case of Flowtel Engineering, far greater flexibility is possible through the use of correlation equations. The rotameter is popular because it has a linear scale, a
    relatively long measurement range, and low pressure drop. It is simple to install
    and maintain.

    Principle of Operation

    The rotameters operation is based on the variable area principle: fluid flow raises a float in a tapered tube, increasing the area for passage of the fluid. The greater the flow, the higher the float is raised. The height of the float is directly proportional to the flowrate. With liquids, the float is raised by a combination of the buoyancy of the liquid and the velocity head of the fluid.
    With gases, buoyancy is negligible, and the float responds to the velocity head alone. The float moves up or down in the tube in
    proportion to the fluid flowrate and the annular area between the float and the tube wall. The float reaches a stable position in the tube when the upward force exerted by the flowing fluid equals the downward gravitational force exerted by the weight of the float. A change in flowrate upsets this balance of forces. The float then moves up or down, changing the annular area until it again reaches a position where the forces are in equilibrium. To satisfy the force equation, the rotameter float assumes a distinct position for every constant flowrate. However, it is important

    to note that because the float position is gravity dependent, rotameters must be vertically oriented and mounted.


    These meters with all steel and plastic fittings to eliminate corrosion
    completely. The meters are useful for measuring flow of air, common
    gases, water and many organic chemicals, excluding petroleum
    products. Applications include purging of gas lines, anaesthesia,
    laboratory instruments, leak detection, cable pressurization, industrial
    furnaces and chromatography etc.

    Rotameter Selection

    The key questions which need to be answered before selecting a rotameter are:
    . What is the fluids?
    What is the minimum and maximum flow rate for the flow meter?
    What is the minimum and maximum process temperature?
    What is the size of the pipe?
    Would you like a direct reading rotameter or is a lookup table acceptable?
    What accuracy do you need?
    Do you require a valve to regulate the flow?
    Will there be back pressure?

    What is the maximum process pressure? 

    Trade Information
    • 7 Per Day
    • 7 Days
      Related Products
      Orifice Plate Flow Meter

      Send Inquiry
      Tubular Level Indicator

      Send Inquiry
      Electro Magnatic Flowmeters

      Send Inquiry
      Bypass Rotameter

      Send Inquiry
      Float and Board Level Gauge

      Send Inquiry
      Magnet Level Gauge

      Send Inquiry
      right arrow
      left arrow
      Contact Us

      Plot No 44/45, Gali No-8, Badhkal Extension, Near B N School / Sainik Colony, Red Light,, Faridabad, Haryana, 121001, India
      Phone :+918045803036